Friday, October 18, 2019
The Past, Present and Future of RFID Research Paper
The Past, Present and Future of RFID - Research Paper Example It is that need for an obscure, yet handy source of data information storage that led to the development and rising use of the Radio Frequency Identifier chips. With the use of the RFID, all necessary information has become just a tag scanner away. No more losing files or misfiling information. RFID is the wave of the future although it is currently mired in doubt and controversy due to privacy issues and the high cost of creating the chip. But as the RFID becomes a truly integral part of our daily lives, the cost and distrust of the technology is bound to go down. Through this research paper, evidence shall be presented showing that there is a growing use for the RFID technology and that the public as slowly learning to get over their apprehensions of the technology's use. As more and more industries come to use the RFID technology in non obtrusive ways, we will find the people more accepting of it and perhaps some people, won't even be aware that have it on their person. In the end , this research paper will show that the RFID technology is the future of our society. It shall play an integral part in our military, social, medical, and financial field. RFID technology cannot be ignored. It is here to stay. The Past, Present, and Future of RFID The history of the RFID system can be traced back to the early RADAR detection systems of World War II. the RADAR technology was first discovered by Sir Robert Alexander Watson-Wyatt in 1935. His technology was created in order to identify incoming planes but it could identify if the plane was friend or foe. It was during this time of war that the passive RFID system was first developed by Germans who reflected the radar signals back as their rolled their planes upon return to base in order to identify themselves as German instead of allied aircraft. (Roberti, The History of RFID Technology). This particular technology led the British to develop the Identify Friend or Foe (IFF) system which was a transmitter located insid e each British plane. The system would receive ground RADAR signals and then send back a signal identifying it as friend. That is the concept that the modern RFID is based upon with a slight difference. An RFID receives a transponder signal which is then interpreter by the chip and answers with either a signal (passive) system or it broadcasts a signal as an active system. (Roberti ââ¬Å"History of RFID Technologyâ⬠) The early scientists had already seen the possible real world applications of the radio frequency technology beyond wartime use. Which is why research in the RF communications system continued well into the 1960's with the United States, Europe, and Japan all collaborating on its possible remote uses in the field of object identification. Commercially, stores began tagging their items in an effort to curb shoplifting by using radio waves to determine the payment status of an item. This is done through the use of electronic surveillance tags that are either turned on or off. Upon payment of the item, the cashier turns the tag off and it can clear the detectors standing at the exit doors of the store. (Roberti ââ¬Å"History of RFID Technologyâ⬠) The first patent for the RFID tag with a rewritable memory was awarded to Mario W. Cardullo on January 23, 1973. Charles Walton also received a patent in the same year for his passive transponder invention that could be used to unlock a door without a key. (Roberti ââ¬Å"
Thursday, October 17, 2019
Certified Aviation Manager Program Essay Example | Topics and Well Written Essays - 500 words - 1
Certified Aviation Manager Program - Essay Example This personal and corporate assurance is a first step into the responsibility of management, and is also serves as a guide to my future obligations to the industry. My goal of working as a department manager will necessitate that I prepare for this additional responsibility. A department manager is accountable to corporate interests as well as being responsible to their employee's concerns and needs. These may be the interactions that take place on a professional level between employees, or may involve the long-term corporate strategy of aviation scheduling or security. CAM Certification provides the foundation for insuring that the qualified manager has the breadth of education and experience required to operate in that capacity. It will assure that I not only have the scope of knowledge necessary, but will also provide me with the confidence that I have the most up to date information and state of the art methods available. The aviation industry is a rapidly changing landscape. Increased regulation, new technology, and heightened security concerns place a high demand on managers in aviation to demonstrate their capability to address many different issues. CAM Certification is a focal point where like minded aviation professionals can exchange ideas and remain current on the state of aviation.
Motivation in work place Assignment Example | Topics and Well Written Essays - 4750 words
Motivation in work place - Assignment Example actor of motivation of the employees in the workplace is extremely important for deciding the performance levels of an organization which functions in the healthcare segment. As such, this research is conducted to evaluate the existing motivation levels, strategies and performance within the organization. Also, the motivation strategies that can be used by the business managers in the organization are considered and their practical application is analysed. The research would be mainly based on secondary research methodology in which data would be gathered from the employee groups working in the NHS foundation Trust. The research report is structured in a methodical and step by step manner. Suitable research aims and objectives are designed followed by a thorough review of the available literatures on the topic of motivation. The literature review would help to provide a base for the development of the research work and for analysing the collected data from a theoretical perspective. The research methodology including data collection techniques and data analysis methods are discussed. This is followed by the finding and interpretations that are derived by analysing the secondary data collected from the research. A well formulated conclusion is given to summarize the findings from the research. Also, a reflective diary that includes the approaches, views and opinions of the researcher is documented. An annotated bibliography is added to review the academic references used for the research work and for highlighting the purpose and use of these literary sources in the paper. The main aim of the research is to evaluate the factor of motivation in workplaces. This is done by understanding what motivation actually is and studying the different dimensions of motivation. The researcher aims to explore motivation form different perspectives and looks into the role of motivation in a workplace. Also, he looks into the different strategies that may be used by the human
Wednesday, October 16, 2019
The Past, Present and Future of RFID Research Paper
The Past, Present and Future of RFID - Research Paper Example It is that need for an obscure, yet handy source of data information storage that led to the development and rising use of the Radio Frequency Identifier chips. With the use of the RFID, all necessary information has become just a tag scanner away. No more losing files or misfiling information. RFID is the wave of the future although it is currently mired in doubt and controversy due to privacy issues and the high cost of creating the chip. But as the RFID becomes a truly integral part of our daily lives, the cost and distrust of the technology is bound to go down. Through this research paper, evidence shall be presented showing that there is a growing use for the RFID technology and that the public as slowly learning to get over their apprehensions of the technology's use. As more and more industries come to use the RFID technology in non obtrusive ways, we will find the people more accepting of it and perhaps some people, won't even be aware that have it on their person. In the end , this research paper will show that the RFID technology is the future of our society. It shall play an integral part in our military, social, medical, and financial field. RFID technology cannot be ignored. It is here to stay. The Past, Present, and Future of RFID The history of the RFID system can be traced back to the early RADAR detection systems of World War II. the RADAR technology was first discovered by Sir Robert Alexander Watson-Wyatt in 1935. His technology was created in order to identify incoming planes but it could identify if the plane was friend or foe. It was during this time of war that the passive RFID system was first developed by Germans who reflected the radar signals back as their rolled their planes upon return to base in order to identify themselves as German instead of allied aircraft. (Roberti, The History of RFID Technology). This particular technology led the British to develop the Identify Friend or Foe (IFF) system which was a transmitter located insid e each British plane. The system would receive ground RADAR signals and then send back a signal identifying it as friend. That is the concept that the modern RFID is based upon with a slight difference. An RFID receives a transponder signal which is then interpreter by the chip and answers with either a signal (passive) system or it broadcasts a signal as an active system. (Roberti ââ¬Å"History of RFID Technologyâ⬠) The early scientists had already seen the possible real world applications of the radio frequency technology beyond wartime use. Which is why research in the RF communications system continued well into the 1960's with the United States, Europe, and Japan all collaborating on its possible remote uses in the field of object identification. Commercially, stores began tagging their items in an effort to curb shoplifting by using radio waves to determine the payment status of an item. This is done through the use of electronic surveillance tags that are either turned on or off. Upon payment of the item, the cashier turns the tag off and it can clear the detectors standing at the exit doors of the store. (Roberti ââ¬Å"History of RFID Technologyâ⬠) The first patent for the RFID tag with a rewritable memory was awarded to Mario W. Cardullo on January 23, 1973. Charles Walton also received a patent in the same year for his passive transponder invention that could be used to unlock a door without a key. (Roberti ââ¬Å"
Tuesday, October 15, 2019
Motivation in work place Assignment Example | Topics and Well Written Essays - 4750 words
Motivation in work place - Assignment Example actor of motivation of the employees in the workplace is extremely important for deciding the performance levels of an organization which functions in the healthcare segment. As such, this research is conducted to evaluate the existing motivation levels, strategies and performance within the organization. Also, the motivation strategies that can be used by the business managers in the organization are considered and their practical application is analysed. The research would be mainly based on secondary research methodology in which data would be gathered from the employee groups working in the NHS foundation Trust. The research report is structured in a methodical and step by step manner. Suitable research aims and objectives are designed followed by a thorough review of the available literatures on the topic of motivation. The literature review would help to provide a base for the development of the research work and for analysing the collected data from a theoretical perspective. The research methodology including data collection techniques and data analysis methods are discussed. This is followed by the finding and interpretations that are derived by analysing the secondary data collected from the research. A well formulated conclusion is given to summarize the findings from the research. Also, a reflective diary that includes the approaches, views and opinions of the researcher is documented. An annotated bibliography is added to review the academic references used for the research work and for highlighting the purpose and use of these literary sources in the paper. The main aim of the research is to evaluate the factor of motivation in workplaces. This is done by understanding what motivation actually is and studying the different dimensions of motivation. The researcher aims to explore motivation form different perspectives and looks into the role of motivation in a workplace. Also, he looks into the different strategies that may be used by the human
Apple Essay Example for Free
Apple Essay The following are the procedures used to make a disappearing ink using the apple extract. The following are the materials; Q-tip, paper, apple juice and a Candle (any source of heat will work, ex. lamp, iron, oven). Begin by pouring a bit of the apple juice into a bowl. Use a q-tip, toothpick, or a paintbrush to write your message on the paper. Let the paper dry thoroughly. This will take about an hour. To decode the message, you will need to heat up the paper. The best way to do this is with a candle. Hold the paper over the candle until the words become visible. The words will become a brown color as they are heated up. The result of my study is that apple extract/juice can be used to make a disappearing ink. Based from the date gathered, the following conclusions were drawn: It works because the apple juice oxidizes in the air. Heating it causes that process to speed up. The juice will turn brown on its own in time. Chapter 1 Problem and Its Background Introduction Apples are obtained from the medium sized tree belonging to the rosaceae family. Scientific name: Malus domestica. The apple tree is originated in the mineral rich mountain ranges of Kazakhstan, and is now being cultivated in many parts of the world. Apple fruit contains good quantities of vitamin-C and beta-carotene. Vitamin C is a powerful natural antioxidant. Sliced apple turns brown on exposure to air due to conversion in iron form from ferrous oxide to ferric oxide. Background of the Study Juice extracted from the apple is used to make invisible ink. Since apples oxidizes when exposed to air turning the color of the juice on paper to brown, heating it up makes the process faster. Statement of the Problem/Objectives Problem # 1: Can we use apple juice extract as an invisible ink? Alternative Hypothesis: Yes, we can use apple juice as an invisible ink. Null Hypothesis: No, we cannot use apple juice as an invisible ink. Problem # 2: Is apple juice a better alternative than other materials? Alternative Hypothesis: Yes, apple juice is a better alternative. Null Hypothesis: No, other materials such as baking soda or lemon juice is a better alternative. General Objectives: 1. To be able to investigate if apple juice can be used as an invisible ink Specific Objectives: 1.To be able to use apple juice as an invisible ink 2.To be able to know how fast the juice oxidizes which would make the hidden words visible. Significance of the study This study aims to find out if apple juice is a good source of invisible ink compared to other fruit juices or materials. Scope and Limitation You need to extract a lot of juice from the apple to be able to complete words on the paper compared to other materials which is readily available. Definition of Terms Apple a fruit which is considered by everybody as delicious and healthy. Color may be red or green. Invisible ink ââ¬â an ink that is not visible to the naked eye. Chapter II Review of Related Literature The world as we know it began with the apple. According to Genesis 3:6, Eve partook of the forbidden fruit, gave it to Adam and their eyes were opened. This fruit of knowledge is generally represented by the apple. Were it not for Eveââ¬â¢s transgression, mankind would never have been born. In the eyes of Christians, at least, our world began with the apple. Malus pumila, the paradise apple has been symbolic of many things throughout history. The genus name Malus comes from the Latin root ââ¬Å"malâ⬠which means bad or evil. In the Garden of Eden it represents sin and knowledge. ââ¬Å"â⬠¦the apple of my eyeâ⬠are the words used by Jehovah in the Old Testament of the Bible, to describe his favored people. The ââ¬Ëappleââ¬â¢ of the eye is the pupil, the center. God said he kept the children of Israel in the apple of his eye as a way of saying to them that they were central and favored, that he watched over them even in their trials. Cutting an apple cross-wise will reveal more symbolism. The shape revealed is a five-pointed star. This pentagram, though often mistaken for a satanic symbol, is actually a Christian symbol which represents the atonement. This five pointed star is also called the Star of Bethlehem, representing the star that appeared at the birth of Jesus Christ. The seeds within the star of the fruit represent the Resurrection and Immortality or Rebirth, as this is how the fruit continues its life. This one fruit symbolizes the Birth, Sin and Death of man, then the Birth of a Savior who will Atone and Resurrect him to Immortality and Eternal Life. This symbolism was carried though to several ancient pagan cultures as well. The Scandinavians had their goddess, Iduna whose name meant ââ¬Ëat-one-ness,ââ¬â¢ very close to the word ââ¬Ëatonement.ââ¬â¢ According to legend, she tended the apple orchards at Asgard a land for the Immortals. To Asgard the other gods went each night to renew themselves. Their immortality depended on partaking of Idunaââ¬â¢s apples. Like Asgard, Avalon was another place for the Immortals. It was believed that Celtic heros like King Arthur didnââ¬â¢t die but sailed through the mist to reach Avalon. Avalon was the ââ¬Å"Apple Islandâ⬠. The name came from the Welsh word ââ¬Å"afalâ⬠or apple. The Irish mythological heros were summoned to Emain Ablach, (Emain of the Apple Trees) or the Avalon equivalent, ââ¬Å"Avallachâ⬠. This was done by an ââ¬Å"other-worldly woman who brings the hero a silver-white blossomed apple branch from Emainâ⬠¦Ã¢â¬ Some believe these legends to be rooted in descriptions of druidic ceremonies. In addition to being a fruit rich in symbolism, there is much plant lore assigned to the apple. Apple boughs hung above the door frame of a house are said to bless the couple that resides therein with added peace and love. Others have used the apple in a love spell that involves cutting the apple cross-wise and sharing it with the one that you love to increase the attraction. In Danish folklore, however, apples are believed to wither around adulterers. Many American children have bobbed for apples on Halloween. This childââ¬â¢s game may have originated from and Irish Tradition, ââ¬Å"La mas nbhal.â⬠This was ââ¬Å"the feast of the apple gatheringâ⬠which took place on All Hallow Eve. There was a spicy cider and toast beverage in which apples were floated. ââ¬Å"It was usual for each person who partook of the spicy beverage to take out an apple and eat it, wishing good luck to the company.â⬠In England on Christmas Eve, there once was a popular custom called, ââ¬Å"wassailing the orchard trees.â⬠The farmer with his family and workers would honor the most productive trees in the orchard with cider and hot cakes while saying the following toast three times: Almost everyone has eaten an apple, but have you ever asked the question where do apple trees grow? The apple trees we know today originated from the a wild apple tree that was native to Central Asia. It can still be found growing in the mountainous regions of Kazakhstan, Kyrgyzstan, Tajikistan and China. Amazingly, this original apple tree is the ancestor of almost every variety of apples that are available today, but unfortunately this species is not listed as vulnerable to extinction. Most species of apples prefer a cool or temperate climate for optimal growing conditions. They tolerate cold conditions very well, but should be planted in full sunlight and away from any frost pockets (the area where cold air settles). They require some maintaining, such as watering and fertilizing, but are generally easy to care for. There are some specially developed species that can tolerate hot and humid weather, but most apples are still grown in cooler regions. Many countries now grow apples for commercial purposes. China and the United States are the worldââ¬â¢s top apple producers, followed by Iran, Turkey, Russia, Italy and India which all produce over two million tonnes per year. The world production of apples now sits at just under sixty five million tonnes. Within the United States over 60% of total production takes place in Washington state where conditions for growing apples are ideal
Monday, October 14, 2019
Management Of Pressure Ulcers In Elderly Patients
Management Of Pressure Ulcers In Elderly Patients Pressure ulcers are an injury that damages skin and the layer(s) of tissue beneath, which have been exposed to pressure (NHS, 2014). They can occur in patients of varied ages; however, the most vulnerable age group who are at risk of developing pressure ulcers are patients aged 75 and above (Hope, 2014). Elderly patients tend to have co-morbidities due to the ageing process, which can sometimes leave them with limited mobility or bedridden and this then can put them at further risk of developing pressure ulcers (Jaul, 2010). Due to having a growing elderly population, it is extremely important to address the risks of pressure ulcers. There is no particular environment in which pressure ulcers occur, as they are a concern in all settings where social care is being provided, medical treatments are carried out including private homes. This paper will review the evidence regarding the risks and management of pressure ulcers. The focus of this paper will be elderly patients and the follo wing topics will be discussed; risk assessment, patient assessment, pressure recognition and removal, non-surgical treatments/advice, complications of pressure ulcers and surgery. On recognition of a pressure ulcer or the possibility of one developing on a patient, a suitably trained health or medical professional should do a documented risk assessment (NICE, 2014). This risk assessment should cover two interlinking areas, risk factors and signs/symptoms. It is important to assess an elderly patients current health status and not just the status of their health as documented previously on records or on admittance to see a professional, as a variety of factors can affect the development of a pressure ulcer some factors more rapidly than others. Questioning into previous medical history and also looking at previous medical notes is often very informative and usually allows the professional to know of any co-morbidity which could present a further risk or act as an indirect cause of the development of a pressure ulcer. Diabetes and musculoskeletal disorders are often flagged up on assessments as a factor which can impact a pressure ulcer (Benbow, 2012). Sometime s due to the elderly patient suffering from a type of dementia, their ability to communicate or remember life events deteriorates and therefore they cannot provide the professional assessing the ulcer with key medical information. Also, some patients may be in trauma or are not conscious; this, again, makes the information gathering stage of the patients current health status difficult for the assessing professional. In such complex cases, the patients wider network such as relations or the multi-disciplinary team of health and social care professionals who have previously supported the patient may have more knowledge on the patients life history. Nursing home staff are required by the Care Quality Commission to keep records of their residents care plans and more specialist homes have routine logs written about their residents; these often can act as a good indicator of physical, mental and behavioural status and changes which have occurred with the elderly patient (CQC, 2015). Determining any other condition which an elderly patient may suffer from is important, because this needs to be considered in the patients care plan and management of the Pressure ulcer as it could have direct impact on the healing of a pressure ulcer. For example, if the elderly patient has diabetes, their wound healing process maybe prolonged (Leik, 2013). Furthermore, as elderly individuals have thinner skin; this already puts them at greater risk of skin damage due to pressure. Musculoskeletal disease such as osteoarthritis is usually diagnosed in elderly individuals and it can limit the mobility of the patient or their ability to do specific activities (NHS, 2014). This may result in patients being in the same position for long periods of time, which may then put pressure on that area of the body, putting them at greater risk of developing a pressure ulcer. Also, elderly individuals who are less mobile are more likely to have poor circulation, which can impact on the time taken for a pressure ulcer to heal. Therefore, blood flow should also be taken into consideration when doing the risk assessment. Above are some examples of how the management of Pressure ulcers can become complex; there are more diseases such as terminal diseases and other medical conditions that need to be taken into consideration when planning the care or prevention of a pressure ulcer. Often both the lack of nutritional intake and loss of weight are two interrelated common concerns in elderly patients, unless the cause is due to a different factor such as underlying pathology of disease. Therefore, in addition to including these factors in the risk assessment, health education to encourage the patient to eat needs to be provided to the patient, their relations and health and social care staff supporting the patient. Health advice/education/guidance is important because an underweight elderly individual is more likely to have less tissue around their bones and possibly poorer blood vessel quality, hence making them more at risk of damage from pressure and also poorer healing (MNT, 2014). Also, a lack of protein in an elderly patients diet, which supports tissue growth and repair, can also cause greater damage to their skin from pressure. Low nutritional intake can also cause fatigue and frailty in elderly individuals and this can impact an elderly individuals engage ment and ability to do daily activities (Morelli and Sidani, 2011), hence impacting their psycho-social status, which may disengage them from supporting their own health, whether it be by following the guidance of a medical practitioner or by being active in their healthcare decisions generally (Morelli and Sidani, 2011). This then can make patient centred care difficult for those providing care for the elderly patient, as patient choice/preference is compromised and indication of pain, which is usually expressed verbally via description or recommended pain scales such as Braden or Waterlow, may not also be provided by the patient (Nice, 2014 and Benbow, 2012). Therefore, the patients involvement in managing the pressure ulcer is vital. Pain management is difficult in Pressure ulcer management if the elderly individual has an altered perception of pain due to a spinal cord injury or other related nerve damage injuries. This may prevent the patient from recognizing that they have an ulcer developing, hence delaying the treatment of the ulcer (MNT, 2014). Therefore, it is good practice if the elderly individual is a patient in hospital to routinely ask the patient if they have seen any abnormalities on their skin and also recommend them to change positions regularly. Alongside the detailed risk assessment, a pressure ulcer assessment/skin assessment should be done on recognition of a pressure ulcer developing. This is not only to manage the Pressure ulcer but also to be aware of those individuals who may have difficulty, as mentioned above, in detecting changes in their skin or possibly even possess a disability. Complaints of pain from the patient should be considered in the skin assessment, followed by a categorization of the ulcer as a stage 1,2,3 or 4 Pressure ulcer (NICE, 2014). This will include assessing discolouration, variations in heat, firmness and skin moisture. The categorization of the Pressure ulcer is extremely important because it allows suitable preventative measures to be put within the individuals care planning, to try to maintain the skins integrity and to support healing (NHS, 2014). The overall patient assessment will directly impact decisions on the frequency of positioning for the patient and the suitability of the support surface on which the patient is sitting or lying (Benbow, 2012). These changes are vital to pressure removal and hence, managing the development of the Pressure ulcer better because they will be included in a repositioning timetable that health and social care professionals will work to as part of the care plan. The frequency of positioning varies based on the risk, patients physical ability/state and also their acceptance to be regularly repositioned; for example, a patient in a wheelchair may need to be repositioned every 15 minutes due to the pressure of sitting in the same position for long periods of time. Elderly patients who are bedridden should be repositioned every couple of hours, depending on the need determined in the risk assessment (NICE, 2014). A physiotherapist can often advise on repositioning that will be safe and that will also allow pressure release. Equipment can also support pressure removal. Cushions on wheelchairs not only provide comfort but they can also lessen the pressure on the hip and upper leg area of the body. However, some specialists advise that air, water or foam filled support devices are better than traditional cushions (Benbow, 2012). Small pillows/foam pads can also support areas of the body from touching each other, such as between the knees or ankles. These can also be used for comfort and support when laying in different angled positions; for example, when a patient is lying on their side, their legs may need further support (Benbow, 2012). Reclining chairs/automated chairs can also be set at different positions to support pressure removal. Patients, relatives and supporting professionals need to ensure that the skin of the patient is regularly checked, as repositioning regularly can also cause skin damage due to the skin of an elderly individual being thinner. Specialised mattresses can also reduce pressure in comparison to standard mattresses. Furthermore, some specialist mattresses can be connected to an air flow system which can automatically regulate the pressure, hence making the care and management of pressure ulcers in bedridden patients easier for health professionals or carers/relatives. This may be a change that medical/health professionals recommend to elderly patients at home or even for patients in long term care/rehabilitation; however, research is still lacking on how much contribution mattress change actually has on directly lessening the risk of pressure ulcer development (Vanderwee et al, 2008 and UCSF, 2011) in comparison to other cost effective changes. Depending on the wound of the ulcer and the skin damage, often dressings and ointments are used to manage the pressure ulcer and to manage infection. Antibiotics may be prescribed, but not often, as usually antiseptic creams can be applied directly on the wound to prevent the spread of infection to connecting tissues. Ointments and creams may also be used to prevent or treat skin damage such as incontinence-associated dermatitis. The skin assessment should be able to identify those at risk of developing such dermatitis, as these patients often have one or more of the following conditions: incontinence, oedema or dry skin (NICE, 2014). Dressings which have been specially designed to promote wound healing and cell regrowth should be used on a pressure ulcer wound. Examples of suitable dressings include hydrocolloid dressings and aliginate dressings (NHS, 2014). These dressings also can support the regulation of skin moisture, which is important to manage the Pressure ulcer. Research an d development into wound repair technology is advancing and specially designed dressings give less trauma to the patient upon removal. Therefore, the correct dressing is vital as unsuitable dressings may cause further skin breakdown. As briefly mentioned earlier in this paper, the patients diet may need altering to ensure that the elderly patient is taking nutrients which will support wound healing. Hydration is also important to maintain skin moisture and avoid flaky skin (Convatec, 2012). Hydrotherapy can also be used to keep skin clean, with possible natural removal of dead cells. In some cases, the wound healing process may be compromised due to necrotic tissue and this dead tissue will need to be removed via a debridement method. Debridement methods vary depending on the clinical situation. Larvae therapy can be used as an alternative method to debridement; this therapy consists of putting maggots on the wound for a few days via a dressing and gauze. Maggots can also promote healing due to the release of a substance that kills bacteria. Sometimes when grade 3 or 4 Pressure Ulcer wounds do not heal or they become complicated cases, surgery is needed. This is usually either surgery which directly closes the wound or flap reconstruction. To conclude, this paper has attempted to cover the overall management of pressure ulcers in elderly patients. Despite, the treatments and clinical practice carried out by medical/health professionals being similar to younger patients, the risks of pressure ulcer development and healing due to the ageing process are different. Also, co-morbidity is more identifiable in elderly patients and skin structure/composition differs due to the thinning of the skin. There are clear guidelines on managing pressure ulcers by NICE; however, further research needs to be done to optimize the management of pressure ulcers in elderly patients (Cullum, 2013). Bibliography Benbow, M. (2012) Management of Pressure ulcers. [Online] Available from:à http://www.nursinginpractice.com/article/management-pressure-ulcers Care Quality Commission. (2015) Regulation 17 ââ¬â good governance. [Online] Available from:à http://www.cqc.org.uk/content/regulation-17-good-governance Convatec. (2012) The Role of Modern Wound Dressings in Stage I Pressure Ulcers and Patients at Risk of Pressure Ulcer Formation. [Online] Available from:à http://www.convatec.co.uk/media/9572137/aquacel-foam-dressing-shown-to-protect-against-ski-11546.pdf Cullum, N. (2013) Study reveals pressure ulcer research uncertainties. [Online] Available from:à http://www.manchester.ac.uk/discover/news/article/?id=10016 Jaul, E. (2010) Assessment and management of pressure ulcers in the elderly: current strategies. Journal of Drugs and Aging. 27 (4). p. 311-325. Leik, M.T.C. (2013) Adult-Gerontology Nurse Practitioner Certification Intensive Review: Fast Facts and Practice Questions. 2nd ed. Springer Publishing Company: New York. Medical News Today. (2014) What are bedsores (pressure ulcers)? What causes bed sores? [Online] Available from:à http://www.medicalnewstoday.com/articles/173972.php Morelli, V and Sidani, M. (2011) Fatigue and Chronic Fatigue in the Elderly: Definitions, Diagnoses, and treatments. Clinics in Geriatric Medicine. 27 (4). p. 673 ââ¬â 686. National Health Institute. (2014) Osteoarthritis. [Online] Available from:à http://www.nhs.uk/Conditions/osteoarthritis/Pages/Introduction.aspx National Health Service. (2014) Pressure ulcers ââ¬â Treatment. [Online] Available from:à http://www.nhs.uk/Conditions/Pressure-ulcers/Pages/Treatment.aspx National Institute for Health and Care Excellence. (2014) Pressure ulcers: prevention and management of pressure ulcers. [Online] Available from:à https://www.nice.org.uk/guidance/cg179/resources/guidance-pressure-ulcers-prevention-and-management-of-pressure-ulcers-pdf University of California at San Francisco. (2011) A critical analysis of Patient Safety Practices ââ¬â evidence report no.43. [Online] Available from:à http://archive.ahrq.gov/clinic/ptsafety Vanderwee, K, Grypdonck, M, Defloor, T. (2008) Alternating pressure air mattresses as prevention for pressure ulcers: A literature review. International Journal of Nursing Studies. 45 (5). p. 784-801
Subscribe to:
Posts (Atom)